![eureka impact gloves](https://www.offshore-technology.com/wp-content/uploads/sites/6/2018/01/eureka-Impact-glove-combo.jpg)
Eureka Safety specialises in the manufacture and supply of working gloves that specifically optimised for use in the oil and gas industry.
The company uses its deep knowledge of textile performance fibres accumulated during our 58-year history to meet the explicit demands of its end-users, and consistently aims to set new quality levels for safety, durability and comfort.
Our ambition is supported by new technologies that help us to combine premium-level quality with affordability, and our gloves continue to set new standards for performance in arc flash, cut, puncture, needle and vibration control.
Vibration-reducing gloves for offshore worksites
Prolonged exposure to vibration is known to cause irreversible injuries, including hand-arm vibration syndrome (HAVS) and vibration-induced white fingers syndrome (VWFS). Unlike most other workplace injuries, HAVS accumulates slowly over a number of years and its eventual onset cannot usually be traced back to any specific accident.
Simply ensuring that workers wear ISO 10819-certified, vibration-reducing gloves is not sufficient to mitigate these risks as, despite providing vital protection, all vibration gloves also create harmful resonance that has the potential to aggravate hand injuries over time.
Eureka Safety provides an extensive catalogue of vibration-resistant gloves designed to provide robust protection in a variety of scenarios, while keeping the risk of harmful resonance as low as possible.
Our range includes the 15-1 Transient Vibration gloves, which offer excellent dexterity and are intended for use during the handling of impacting tools such as hammers and mallets, as well as the Impact Vibration family of gloves designed for fast vibrating electrical tools between 350Hz-400Hz.
We also offer Impact Vibration Amplitude gloves, which offer the best protection when working with slow and medium frequency motorised tools ranging from 150Hz-200Hz, in addition to the Impact Vibration Flexi variant that is equipped with removable fingertips.
Reliable impact protection testing for increased worker safety
Europe’s latest EN 388 safety standard incorporates the EN 1621 impact testing method, which measures the remaining force transmitted to the hand after a 5J impact.
This force is the equivalent of a 1kg steel, orange-sized ball dropped from a height of 50cm. The requirement for EN 388 will be a maximum force of 7kN, or approximately 700kg.
Eureka plans to adopt an alternative in-house testing method, where the same EN1621-1 methodology is used to estimate the required energy to break a finger (approximately 150kg / 1.5kN) or to break the knuckles (roughly 400kg / 4kN) to ensure the company’s products provide the necessary protection for all common worksite accidents.
Intelligent foam impact-protection gloves for marine personnel
Eureka’s classic Impact Xtreme series provide extraordinary protection against impact and pinches, while the advanced materials offer unprecedented levels of protection for the wearer’s fingers and knuckles during high-risk activities.
The Impact Light range is specially designed to be thin and delicate, yet tough enough to manage the impact requirement of the EN 1621-1 standards.
Eureka’s unique 15-4 Impact insider provides a thin yet EN 388:2016 impact ‘P’-certified glove with cut 5/D resistance. This glove sits perfect under a chemical glove or another heavy-duty glove to provide additional protection.
Our 15-4 Impact Hammer is soft and delicate to wear, while the intelligent foam is tough enough to protect the index finger and thumb against most hammer strikes.
Puncture and needle resistant gloves for marine operations
Eureka’s Swedish research and development (R&D) facility has created two distinct fabrics designed to deliver consistently reliable puncture, cut and needle resistance for offshore personnel.
Our innovative SupraBlock Stop fabric is equipped with a 25-gauge needle resistance of around 9N according to ASTM 2878 standards and is fully certified to CE / ANSI cut-resistance Level 5, providing an excellent safeguard against puncture injuries and other harmful work accidents.
Alternatively, our SupraBlock Soft material is a softer and more breathable variant for less strenuous applications, which provides a needle resistance of approximately 5N and is CE-certified to Level 3.
Eureka Safety possesses a wide selection of products that have been carefully developed to deliver robust, effective protection against steel wire splinters, needles or combined cuts / punctures depending on customers’ needs.
Cut-resistant work gloves for offshore environments
Eureka provides three different lines of cut-resistant glove to serve a wide variety of operational needs, which range from moderate to very-high cut resistance (ANSI A9, EN 388 5/F) depending on the intended application.
Our ’General’ family of work gloves are compliant with ANSI / CE cut Levels E and F and feature balanced designs suitable for a versatile array of environments, including the harsh conditions of the North Sea.
The ‘Cool’ line are certified to cut-resistance Levels B to F and consist of a range of super-thin, protective, cool-feel gloves that are designed to be comfortable in hot working environments. However, in a similar manner to all high-performance polyethylene (HPPE) or Dyneema gloves, they are unsuitable for exposure to flames, sparks or extremely high temperatures due to safety risks.
Conversely, Eureka’s ‘Heat’ series of gloves are specifically optimised for use in high temperature applications and are able to provide robust protection against flames, heat radiation and arc flashes.